251 research outputs found
A linear construction for certain Kerdock and Preparata codes
The Nordstrom-Robinson, Kerdock, and (slightly modified) Pre\- parata codes
are shown to be linear over \ZZ_4, the integers . The Kerdock and
Preparata codes are duals over \ZZ_4, and the Nordstrom-Robinson code is
self-dual. All these codes are just extended cyclic codes over \ZZ_4. This
provides a simple definition for these codes and explains why their Hamming
weight distributions are dual to each other. First- and second-order
Reed-Muller codes are also linear codes over \ZZ_4, but Hamming codes in
general are not, nor is the Golay code.Comment: 5 page
Origin of the time dependence of wet oxidation of AlGaAs
The time-dependence of the wet oxidation of high-Al-content AlGaAs can be either linear, indicating reaction-rate limitation, or parabolic, indicating diffusion-limited rates. The transition from linear to parabolic time dependence can be explained by the increased rate of the formation of intermediate As{sub 2}O{sub 3} vs. its reduction to elemental As. A steadily increasing thickness of the As{sub 2}O{sub 3}-containing region at the oxidation front will shift the process from the linear to the parabolic regime. This shift from reaction-rate-limited (linear) to diffusion-limited (parabolic) time dependence is favored by increasing temperature or increasing Al mole fraction
High performance aluminum–cerium alloys for high-temperature applications
Light-weight high-temperature alloys are important to the transportation industry where weight, cost, and operating temperature are major factors in the design of energy efficient vehicles. Aluminum alloys fill this gap economically but lack high-temperature mechanical performance. Alloying aluminum with cerium creates a highly castable alloy, compatible with traditional aluminum alloy additions, that exhibits dramatically improved high-temperature performance. These compositions display a room temperature ultimate tensile strength of 400 MPa and yield strength of 320 MPa, with 80% mechanical property retention at 240 °C. A mechanism is identified that addresses the mechanical property stability of the Al-alloys to at least 300 °C and their microstructural stability to above 500 °C which may enable applications without the need for heat treatment. Finally, neutron diffraction under load provides insight into the unusual mechanisms driving the mechanical strength
A Survey of Finite Algebraic Geometrical Structures Underlying Mutually Unbiased Quantum Measurements
The basic methods of constructing the sets of mutually unbiased bases in the
Hilbert space of an arbitrary finite dimension are discussed and an emerging
link between them is outlined. It is shown that these methods employ a wide
range of important mathematical concepts like, e.g., Fourier transforms, Galois
fields and rings, finite and related projective geometries, and entanglement,
to mention a few. Some applications of the theory to quantum information tasks
are also mentioned.Comment: 20 pages, 1 figure to appear in Foundations of Physics, Nov. 2006 two
more references adde
Recommended from our members
Wet oxidation of AlGaAs vs. AlAs: A little gallium is good
Buried oxides formed from the wet oxidation of AlGaAs alloys, rather than AlAs, are found to be superior in terms of oxidation isotropy, mechanical stability, and strain. It is not surprising that vertical-cavity surface-emitting lasers (VCSELs) using AlGaAs oxide layers as current apertures have shown promising reliability as compared to VCSELs using AlAs layers. Comparisons of lifetime data for VCSELs with differing oxide layers is presented. The beneficial properties of oxides converted from AlGaAs alloys are found to provide robust device processing of reliable VCSELs and may play an important role in other advanced optoelectronic devices
Recommended from our members
Superconducting Photoinjector
One of the frontiers in FEL science is that of high power. In order to reach power in the megawatt range, one requires a current of the order of one ampere with a reasonably good emittance. The superconducting laser-photocathode RF gun with a high quantum efficiency photocathode is the most natural candidate to provide this performance. The development of a 1/2 cell superconducting photoinjector designed to operate at up to a current of 0.5 amperes and beam energy of 2 MeV and its photocathode system are the subjects covered in this paper. The main issues are the photocathode and its insertion mechanism, the power coupling and High Order Mode damping. This technology is being developed at BNL for DOE nuclear physics applications such as electron cooling at high energy and electron ion colliders.
Deep Eutectic Solvents (DESs) and their applications [forthcoming]
Deep Eutectic Solvents (DESs) and Their Application
- …